Glazik Ltd,
No 3, 3rd Floor
Airside, Boeing Avenue,
Waterford Business Park,
Waterford, Ireland.
Tel:353-51-431100

Glazik
Technical Sales Manager, Germany, Norma Zieger
Tel: +49 1605505428
Email:nzieger@glazik.eu

Johnson FreFlow

johnson_freflow

The Johnson FreFlow self priming pump has approx 20 pumps in the range. The FreFlow is capable of suction lift of 7 meters. Units comes in short coupled or long coupled designs. The FreFlow is a robust and long lasting pump. Self priming capabilities enables maintenance at ground level without submersion or requirements for guide rails or hoists.

Non return valves are not required on the inlet and units will handle liquids containing air or gas. The Back-Pull-Out system allows for maintenance in situ without removal from established pipework and lagging. Units are sized depending on flow requirements and system piping layout

 



Description

 

There are 19 pumps in the Johnson Freflow Pump range. Connection sizes go from 32mm to 150mm.  Immersion of the mechanical seal in an oil bath, on the atmospheric side, enables the pumps Self Priming capability of up to 7m therefore eliminating the requirement for foot valves.

 

Availalbility in different materials of construction enable it to be suited to handling contaminated fluids.  FreFlow is easily maintanined through it's back pull out design, allowing maintenance in situ without the requirement for removal from pipework. 

  

Specification

 

Casing material - Cast iron, Nodular cast iron, Bronze


Impeller - Cast iron, Bronze


Max Capacity - 350m3/h
Max Head - 80 m
Max Liquid temperature - 80°C
Max Pressure - 9 bar 
 

Documentation

Here you can locate Product Brochures, Operations & Maintenance Manuals, Pump Curves and Drawings.  

 

View Sales Brochure here.

 

View Operations Manual here:  FreFlow, KGE, CombiPrime

 

If its not here please contact us and we will locate it for you.